Aluminum Wiring Replacement
In recent years there has been an increase in the concern over the safety of aluminum wiring. In particular, purchasers or owners of homes built from the mid 1960’s to the late 1970’s with aluminum wiring are finding that many insurer’s will not provide or renew insurance coverage on such properties unless the wiring is inspected and repaired or replaced as necessary, and the work is inspected by a Master Electrician, and a copy of the certificate of inspection is provided to the insurer. In some cases the insurer may require replacement of the aluminum wiring with new copper wiring.
Problems with Aluminum Wiring
Reported problems with aluminum wiring have been related to the overheating and failure of aluminum wiring terminations. This is due to the tendency of aluminum wiring to oxidize, and aluminum’s incompatibility with devices designed for use with copper wiring only. Aluminum has a higher rate of expansion than copper wiring, which can lead to loose connections, arcing and melting, eventually fire. Warm cover plates or discolouration of switches or receptacles, flickering lights or the smell of hot plastic insulation may be evidence of poor or improperly made connections.
What Can You Do?
All homes are wired differently and must be assessed on an individual basis. The CMEQ recommends that the Montreal homeowner hire an authorized Montreal Master Electrician that is knowledgeable in the approved methods for working with, and repairing aluminum wiring. You do have a couple of options, and at Novatek Electric we will walk you through the whole process.
Aluminum Wiring Upgrading
Replacing all the receptacles and switches in the home, with ones that are rated for aluminum wiring, and treating all other connections at light fixtures and junction points with an antioxidant, and replacing wire connectors with ones that are rated for aluminum.
Rewiring would be the best long term solution for eliminating problems associated with aluminum wiring, but it also represents a substantial investment. This may be the best solution in some cases.
Less costly, the addition of copper connecting “pigtail” wires between the aluminum wire and the wired device (receptacle, switch, or other device). *Mostly Recommended